Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 24.06.2025 05:27

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

[old diagram got deleted by accident]

2024–10–10[John johnson John Johnson ]

eight

Texas Tech's NiJaree Canady breaks down after heavy pitching load in Women's College World Series - AP News

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Barnstars:

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

'Call of Duty: Black Ops 7' to Star Milo Ventimiglia, Kiernan Shipka - Variety

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

but this device (an Inductor) … impedes the rapid changes in the current.

Amazon Draws Whole Foods Closer in Grocery Unit Reorganization - Bloomberg

These are simplified answers to the original question, and does not change anything I wrote above.

A fuse is a non-resetable over current circuit protector.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

If you believe in God, do you think God can save you from cancer?

First Sentence:

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Samsung is giving these Galaxy phones a big One UI upgrade - here's which models qualify - ZDNET

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Because the load is inductive, the current lags the voltage.(by a bit).

but I think this circuit , shows a few more pieces.

Could humans be selectively bred, like dogs, to create 2 subspecies that can no longer have offspring? Do I not understand selective breeding properly? Im not worried about the moral implications, just the science please.

Now when you have a certain ac resistance, then a current flows in a loop.

In schematic diagrams this is the symbol for a fuse:

what exactly is a ‘surge’ protector?

NYC’s Noisy Skies Get Electric With Beta’s Demo Flight Into JFK - Bloomberg.com

A circuit breaker is similar, but is resettable.

The third is lightning and “how it gets conducted into a home.”

This device then solves the entire problem.

Do all armies have the same rank structure?

There are three different concepts here that are getting confused.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

It also is a device that limits the change in current flow.

How can you know if they are your twin flame and not limerence or obsession?

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Here is a simplified AC power diagram.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Drinking coffee could help you age better, according to this Harvard study. - Stewartville Star

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–16 [ OO OLAOYE OYEBODE ]

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

U.S. economy stalled in May, Fed survey finds - MarketWatch

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

These devices are installed between the “hot” and “neutral” and protective ground.

What does a fuse do?

'Club World Ca$h Grab': Players don protest shirts at pregame - Sounder at Heart

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

But… the neutral is now “floating” because of the 1 ohm resistance.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

the problem then depends on "how fast does the fuse operate?".

It seems Mohan does not understand the difference between a comment and an Answer.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

At one ohm, the resistor has a maximum of 1 watt power.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

nine

a photo is worth a thousand words.

(Dc diagram shown, AC is similar).

2024–10–14 [Omar Gharbi Omar Gharbi ]

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

The bolt then partially travels down the line to your home.

He then describes Rainy Season and Lightning.

This is 'the assistant's answer'

What is lightning?

Edit 2024–10.

Upvotes:

One is “what exactly is in a ‘surge protector’ ? ”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

An AC voltage/ current source, and an ac inductive load.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

He then asserts :

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

The other is “what does a “fuse” do?”

I post the exact comment here.

This one hit behind the barn.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is where the MOV conducts again, and dissipated the energy.

[image of Common-mode choke]

The MOV will conduct when the voltage exceeds 50% of line voltage.

So, the voltage could go up to 500 volts, and the fuse will not open up.

so, what happens?

At least they know the answer if they wanted it.

This is where this question deviates from being a 'generic' question, and becomes more specific.

He then describes the function of a fuse.

One

There are two important concepts here.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

But it can get overloaded, and no longer works.

For this case there are devices called Metal oxide varistors (MOV).